EV Charger Installation in Sandy, UT

Charging at home is the best part of owning an electric vehicle, as long as the circuit behind the charger is sized and installed correctly. KITMUND provides EV charger installation in Sandy for every make, from a 240 volt outlet in the garage to a hardwired Tesla Wall Connector.

Call (888) 633-7804Same-day service, 24/7 emergency response

EV charger installation in Sandy, UT: what we handle

Our electricians start with a load calculation on your panel, then choose the circuit size and charger location that give you the fastest charge your service can support. We install home EV charging stations in garages, carports and driveways across Salt Lake County.

Level 2 charger installation

A 240 volt charging station that adds many times the range per hour of a standard wall outlet.

Tesla Wall Connector installation

Hardwired on a dedicated circuit sized for the charge rate you want.

Home EV charging stations

ChargePoint, Wallbox, Emporia, JuiceBox, Ford, Rivian and other EVSE units.

240 volt EV outlets

A NEMA 14-50 or 6-50 receptacle on a dedicated circuit for plug-in chargers.

Load calculations and load management

We check whether your panel has room, and offer load-sharing devices when it is tight.

Outdoor and detached garage installs

Weatherproof equipment, trenching and conduit where the charger is away from the panel.

Signs you need EV charger installation in Sandy

The portable cord that came with the car cannot keep up with your driving
You are taking delivery of a new EV or plug-in hybrid
A second EV is joining the household
You want a tidy hardwired charger instead of a cord through the garage
Your panel is full and you are not sure it can take a charger

Why it matters in Sandy

Homes in Sandy are being asked to do more every year: car charging, heat pumps, induction ranges, finished basements and home offices. Many houses along the Wasatch Front still run on 100 amp services with full panels. A load calculation tells us what your service can carry before anything new is added.

For EV charger installation in Sandy, call KITMUND at (888) 633-7804. We serve every part of Sandy, UT and the rest of Salt Lake County.

How our EV charger installation service works in Sandy

Call (888) 633-7804
Tell us what is happening or what you want installed. We ask a few questions and book a time, or send someone straight away if it is urgent.
We look and explain
The electrician inspects, tests and tells you in plain words what is needed and what it will cost before work starts.
We do the work
Neat, code-correct work with floors and furniture protected. Permits and inspections are arranged where the local jurisdiction requires them.
We test and walk you through it
Everything is tested and labeled, the work area is cleaned, and we show you what was done.

EV charger installation near me: Sandy and nearby towns

Our electricians work in every part of Sandy, including Alta Canyon, Pepperwood, Crescent, Historic Sandy, Willow Creek, Granite and Bell Canyon. Whether you searched for EV charger installation near Crescent or an electrician in Historic Sandy, you reach the same crew at the same number. Nearby communities we travel to from Sandy include Midvale (about 2 mi), Riverton (about 5 mi), South Jordan (about 5 mi), Draper (about 5 mi), West Jordan (about 6 mi) and Herriman (about 10 mi).

EV charger installation questions in Sandy

How much power does a Level 2 charger need?

Most home chargers run on a 240 volt circuit between 30 and 60 amps. A Tesla Wall Connector delivers its top rate on a 60 amp circuit. We size the circuit to your vehicle and your panel.

Will I need a panel upgrade for an EV charger in Sandy?

Not always. Many Sandy homes have enough capacity, and load management devices can help when the panel is close to its limit. If an upgrade is needed we will explain why and quote both together.

Do you install chargers for brands other than Tesla?

Yes. We install every major brand of EVSE and can add a 240 volt outlet for plug-in units.

How long does an EV charger installation take?

A straightforward garage install near the panel usually takes a few hours. Longer runs, trenching or panel work add time.

More electrician services in Sandy, UT

People find this service by searching for EV charger installation Sandy, Tesla charger installation Sandy, Level 2 charger installation Sandy, home EV charging station Sandy, electric car charger installation Sandy, EVSE installation Sandy, Tesla Wall Connector installation Sandy and EV charger installation near me.

Talk to an electrician now

EV charger installation in Sandy, UT. Call (888) 633-7804 for fast service, 24/7.

Call (888) 633-7804